Transmission, Clutches, Shifters Posts regarding Transmissions. Clutches, torque converters, shift kits, Gear ratios, Limited Slip Differentals, etc for your Hyundai

updated talon shifter will work

Old 09-15-2002, 01:14 PM
  #1  
Senior Member
Thread Starter
 
Join Date: May 2001
Posts: 160
Likes: 0
Liked 0 Times in 0 Posts
Default updated talon shifter will work

i was at local pick and pull and noticed a talon
shifter console was gone and it looked a lot like ours but the throws are shorter and the shaft is shorter
what do you think



[ September 17, 2002, 08:23 PM: Message edited by: XtremePc ]
XtremePc is offline  
Old 09-15-2002, 05:08 PM
  #2  
Senior Member
 
Join Date: Aug 2001
Posts: 5,550
Likes: 0
Liked 0 Times in 0 Posts
Default

eek! eek! eek!
its the PCextreme short shifter
eek! eek! eek!

looks very similar

[ September 16, 2002, 12:47 AM: Message edited by: JAWS 021 ]
JAWS 021 is offline  
Old 09-16-2002, 01:27 AM
  #3  
Senior Member
 
Join Date: Jun 2002
Posts: 663
Likes: 0
Liked 0 Times in 0 Posts
Default

the worst could happen is that it wouldn't work. i'd try it. because i looks like it would fit. besides it only takes 10 mins at the most to swap them out.
Solo-Baric is offline  
Old 09-16-2002, 03:16 AM
  #4  
Senior Member
 
Join Date: Dec 2001
Posts: 567
Likes: 0
Liked 0 Times in 0 Posts
Default

No, they are opposite...it looks like it would work but the cable needs to be hooked up on the left side, that one looks like it connects on the right.
KSpec is offline  
Old 09-17-2002, 10:54 AM
  #5  
Senior Member
 
Join Date: Jan 2002
Posts: 218
Likes: 0
Liked 0 Times in 0 Posts
Default

QUOTE
HE-MAN:
No, they are opposite...it looks like it would work but the cable needs to be hooked up on the left side, that one looks like it connects on the right.
Umm the mounts on that shifter mount on the left. look at the mounting bracket the left side of the photo has the holes for the cables to route through which then in turn attach on the left. looks almost exactly like ours. not 100% sure without measuring it.
NightRaven is offline  
Old 09-17-2002, 01:33 PM
  #6  
Senior Member
Thread Starter
 
Join Date: May 2001
Posts: 160
Likes: 0
Liked 0 Times in 0 Posts
Default

ok i put it in and let me tell you short throw
very short take's more effort to shift thats for sure

new bolt hole's had to be drilled
but it will defintitly work
and i only paid 10 bucks fot it



XtremePc is offline  
Old 09-17-2002, 02:19 PM
  #7  
Senior Member
 
Join Date: Jul 2001
Location: Winnipeg
Posts: 4,828
Likes: 0
Liked 0 Times in 0 Posts
Default

Cool beans man!
smile.gif

That's good to know
I'm guessing the shifter has the same thread pattern as ours, so you can put the OEM knob on?
KayJai is offline  
Old 09-17-2002, 02:23 PM
  #8  
Senior Member
 
Join Date: Dec 2001
Posts: 608
Likes: 0
Liked 0 Times in 0 Posts
Default

What year Talons/Eclipse/Lasers?
J@WS 01 is offline  
Old 09-17-2002, 02:25 PM
  #9  
Senior Member
 
Join Date: Dec 2001
Posts: 567
Likes: 0
Liked 0 Times in 0 Posts
Default

Oh, right, I was looking at it from the wrong perspective...my bad. Hey...that's cool!
KSpec is offline  
Old 09-17-2002, 03:05 PM
  #10  
Senior Member
Thread Starter
 
Join Date: May 2001
Posts: 160
Likes: 0
Liked 0 Times in 0 Posts
Default

QUOTE
[email protected] 01:
What year Talons/Eclipse/Lasers?
91 to 94 seems to be the better of them shorter throw
thats the one i got out of a 94 talon

LINKY

[ September 17, 2002, 10:06 PM: Message edited by: XtremePc ]
XtremePc is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: