Transaxle area (Manual)
Thread Starter
Senior Member
Joined: Jan 2002
Posts: 686
Likes: 0
From: New Zealand
Vehicle: FX Coupe
Transaxle area (Manual)
hay people..
Well i have to take my gearbox out which is gona cost a bit.
So here's my Q.
What can be upgraded around this area i have a 55 shot and some pistons to install aswell.
I was thinking.
Clutch - HVE Heavy duty
Fly wheel
Any thing else?
Cheers for the info...
Well i have to take my gearbox out which is gona cost a bit.
So here's my Q.
What can be upgraded around this area i have a 55 shot and some pistons to install aswell.
I was thinking.
Clutch - HVE Heavy duty
Fly wheel
Any thing else?
Cheers for the info...
Super Moderator
Joined: May 2001
Posts: 11,851
Likes: 2
From: Rancho Palos Verdes, CA
Vehicle: 2008 Toyota Prius 2006 Suzuki SV650S
for a 75 shot of Nitrous, the stock driveshafts should be fine.
Adding a Kazz or Quaife Limited Slip Differential (LSD) would help.
If you want to go all out, you can change gears and final drive ratios. You can either reuse stock parts from various different beta trannies, or order in gearsets from Korea.
Adding a Kazz or Quaife Limited Slip Differential (LSD) would help.
If you want to go all out, you can change gears and final drive ratios. You can either reuse stock parts from various different beta trannies, or order in gearsets from Korea.
Moderator
Joined: May 2001
Posts: 7,166
Likes: 6
From: San Antonio, TEXAS!!!
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
Here's everything you need for your h.p. range. See my post here: http://www.teamsr.org/UBB/ultimatebb.php?u...c;f=16;t=002397
