Complete RD2 Interior Console and Interior Trim - $299.00 USD Price does not include shipping. Paypal buyers add 3% to total purchase price to cover fees. Items sold AS-IS.



Included is EVERYTHING you need to convert an ugly RD1 (1997-1999 Hyundai Tiburons) interior to the better-looking RD2 (2000-2001 Hyundai Tiburons). As mentioned in some of the Do-It-Yourself topics out there for this project, it is not quite as simple as just replacing the panels, many of the cabin controls move locations slightly and feature different plugs behind the dash. For your convenience the entire wiring harness is included with the dash console, as pictured below, making this "kit" somewhat of a "plug n'play" item for someone wanting to update their RD1 to the RD2 interior styling.



All of the items are in New Condition, purchased direct from Hyundai. They have been stored in various locations for quite some time so there is some slight damage to note;

The drivers door panel has a slit about an inch or so long (tiny), there was a hole drilled in the top of the dash cover, the door panel light (driver's side) has the bulb mount broken, and the rheostat switch has gone missing.



$50.00 shipped -Cluster facia panel assembly (no instrument cluster included) w/ all associated switches, buttons, air vents, etc.

SOLD!! -Center Console Assembly w/ coin holder, storage cup, parking brake boot, covered storage compartment (with WORKING/LATCHING LID!) ..apparently hard to find

SOLD!! -Console Upper Cover (shifter surround) w/o boot

SOLD!! -Crash Pad Center Facia Panel (radio surround) w/ Cig Lighter/Ash Tray Compartment and Cup Holder Assembly - Double Din

SOLD!! -Crash Pad Center Facia Panel (radio surround) - Single Din w/o Cig Lighter/Ash Tray Compartment and Cup Holder Assembly

SOLD!! -Crash Pad Console Wiring Harness

SOLD!! -Clear Door Lenses - OEM (red) replacement. Fits 1997-2001 Hyundai Tiburon Door Panels

SOLD!! -Heater Control Assembly w/ AC controls

SOLD!! -Crash Pad lower panel w/o rheostat switch (dimmer switch)

SOLD!! -Driver Side Door Trim

SOLD!! -Driver Side facia paneling (attached to door trim) w/ all associated components (door inside handle bezel, door speaker grill, door pocket, power window switch w/ power mirror control, door handle screw inserts, air vents & seals etc.)

SOLD!! -Passenger Side Door Trim

SOLD!! -Passenger Side facia paneling (attached to door trim) w/ all associated components (door inside handle bezel, door speaker grill, door pocket, power window switch, door handle screw inserts, air venst & seals, etc.)







Thanks for looking! Message me to arrange payment/shipment details.

 

How much for the clear lenses on their own mate?

 

Currently, they are not available for individual sale. I'd like to sell them along with the interior if I can and the buyer wants them. Give it some time, based on interest I may put em up for sale individually. Check back

 

Also, $299 is what I would LIKE to get out of this as that is a roundabout figure I remember paying for everything. But I want it gone, so if you want this feel free to make an offer. Worst I can do is say no.

 

I'd be interested in it all. Can you give me a shipping quote for 41076 or let me know where you would be shipping from. I know it would be an estimate, but anything in the ballpark is better than nothing. Thanks.

 

Shipping for all of this is going to vary widely based on whether or not you will be wanting the entire door trim assembly or willing to reuse your current ones and just take the door trim facia panels + door handle inserts, window controls, door handles, etc due to the large difference in size of box needed to ship.



Either way, the door panels will probably be flat packed and shipped in one container, the center console in another, and the crash pad and other panels in a third.



Items will be leaving 86314, Northern Arizona. For shipping it all to KY, budget for right at about or a little over $100 but less than $200 depending on what all you will be needing/wanting.



Message me details on what specifically you'd like, I can work with you to try and keep the costs down.

 

 

if you do plan on parting it out i call early dibs on the middle console with the working lid

 

I currently have an offer on the upper and lower cluster facia (without wiring harness), radio surround and shifter surround to one interested party as well as the clear door panel lens covers to chapp.



That leaves the center console to you, rd2twisted if I do end up parting out. And the door panels..



Anybody out there want/need new condition, complete RD door trim panels with RD2 door trim facia?

 

Are they worth $40 shipped to ya?