DIY: Captive hub/rotor swap

States you'll post pics tomorrow.
I don't neccessarily need the pics but was wonderin' if you had them?
...if not should I bring the digicam to Nopi and we can take pics of MY cduring the install/swap

Lemme know

I should have have the tools come Nopi time (Sat.)...

Floor jack(hopefully)
Stands
couple hangars for the calipers
various sockets
motherly 32MM socket and breaker bar for the Mother Theresa bolt (I know what you'r talking about I had to deal with the rear tow during my drum to disc swap, LOL).
some grease
rotors
you're bringing the hubs AND studs (hopefully you talked with David?)
..and the cotter pins (thanks btw wink1.gif )
Crystal Method CD
this rubber mallet I have with me during every install (seriously your best friend when things turn south)

and the rest of the usuals
scredrivers
lightweight carbon fiber plexi-work gloves for faster movement of hands spray painted ricer blue and cf
chocks (two big rocks)
two 30 packs of Corona (don't ask where I got it from)
^^that's how we do here in the SW wink1.gif
and some nifty Mr. Clean Heavy Duty paper towels

maybe a snack lunch

 

<div class='quotetop'>QUOTE (Patreezy @ Mar 14 2006, 01:29 PM) <{POST_SNAPBACK}></div><div class='quotemain'>DIY: Captive hub/rotor swap

States you'll post pics tomorrow.
I don't neccessarily need the pics but was wonderin' if you had them?
...if not should I bring the digicam to Nopi and we can take pics of MY cduring the install/swap</div>

Good eye. LOL I've been needing to get in there and do it. I'll get them up this week for sure, yes, I have them. You can take any additional pics and we'll put them in there.

As for tools, bring what you can, particularly the jack and stands and such. I'll have my tool bag with a few socket sets and a few ratchets with extensions. I'll bring my cotter pins and some gloves. If you need me to, I can probably bring my breaker bar too, but I'll be a bit tight for room.

I lised the sockets you need for SURE. You really don't need anything else. Maybe some open ended wrenches for prying, but I'll have mine there.

<div class='quotetop'>QUOTE </div><div class='quotemain'>you're bringing the hubs AND studs (hopefully you talked with David?)</div>

I have, but I don't have them yet. Might wanna smack him around a bit. We'll get them there.

<div class='quotetop'>QUOTE </div><div class='quotemain'>this rubber mallet I have with me during every install (seriously your best friend when things turn south)</div>

I've got a 3 LB craftsman sledge I picked up, I'll bring it. We will probably need it. LOL

<div class='quotetop'>QUOTE </div><div class='quotemain'>and some nifty Mr. Clean Heavy Duty paper towels</div>

Bring some gojo.