Mahonroy

Hey guys, I have a lot of misc. Hyundai Elantra/Tiburon I4/V6 components, including a lot of turbo components. I figured it was time to have a garage sale! As many of you know, I have been slowly transitioning away from turbocharger kits and more into electronics, so you can definitely get a deal on some of this stuff.

Shipping for any of the small things will most likely be between $5-$10. Some of the larger items shipping might be closer to $20. Some of the larger/heavier things we will need to see what shipping costs (I can provide estimates though). There are some heavier items that would probably be preferable for a local person to pick up as well.

I uploaded a few images you can use for reference as well, but this is the gist of it:
_

• Maintec Turbo Manifold - Originally 1100 300
• Jattus Top Mount Manifold - TD05 Flange (incomplete) 300
• Downpipe For Top Mount Manifold 60
• 16G/18G/20G TurboDischarge Flange 25
• Elantra/Tiburon Jattus Manifold Jig 300
• Kia Soul Jattus Manifold Jig 300
• Hyundai/Kia 4 Cylinder Oil Return Block Drill Guide Jig 30
• Engine Coolant Taps -6AN (individual) 20
• Turbo Oil Drain Flange w/ Fitting -8AN 9
• Delta V6 Engine Head Exhaust Manifold Flanges (set) 90
• FMU 30
• Bosch Electric Intercooler Pump 317GPH 12V Air Water 70 SOLD
• Vacuum Manifold 15
• Eastwood Bead Former - Originally 140 80
• Honda Intake Manifold Flange 50
• Honda Throttle Body Flange 25
• 16G/18G/20G Internal Wastegate Actuator (12psi) - Originally 50 15
• 2004 Hyundai Elantra Axle CV Boot Kit - Originally 25 10
• Carbon Fiber Pillar Pod w/ boost and narrow band air/fuel 50
• 2004 Hyundai Elantra Shop Manual 25
• TB25 Turbo Discharge Flange 25
• TB25 Turbo Inlet Flange 15
• GT28 Ball Bearing Turbo (genuine Garrett), probably needs new center cartridge/rebuild - Originally 1200 300
• Misc Turbo 30
• Infinity G35 Oil Pan Spacer (increase capacity & oil return) 60
• 3 Bar MAP Sensor 15
• 2004 Hyundai Elantra Windshield Washer Fluid Reservoir 15
• Oil Catch Tank 15
• Water-To-Air Intercooler (Barrel Style) - Originally 190 110
• Water-To-Air Intercooler Radiator/Heat Exchanger - Originally 150 100 SOLD
• Custom Intake Manifold - Beta/I/II, mustange throttle body flange, w/ fuel rail 200 SOLD
• Water-To-Air Intercooler (Same Side Inlet/Outlet) - Originally 150 70
• Water-To-Air Intercooler (Opposite side Inlet/Outlet) - Originally 150 70
• Beta II Intake Maifold (2004?) 30
• Beta II Fuel Rail (2004?) 20
• KLS-8T6 Fuel Controller (will provide fuel maps for reference) - Originally 200 120
• Oil Return Block Drill Guide 10
• Sub Injector Weld On Bung - Originally 40 25
• Water-To-Air Intercooler Subaru 2.5l Bolt In 200
• Mustang 70mm Throttle Body (was using on Beta II engine) - Originally 130 50
• Greddy Type S BOV (Genuine) - Originally 250 70
• Engine Torque Damper Kits (Blue/Red, Beta II 2.0 & Delta V6) - Originally 150 80
• Emusa 38mm External Wastegate 40
• TB25 Turbocharger - setup for use with external wastegate 110
• Beta I Head 25
• Beta II Head 25
• Beta II Engine Block 50
• Delta 2.7L V6 Engine, on engine stand. A few sensors missing, mostly complete. Low compression 120
• A Ton of different silicone couplers - Might be easiest to just stop by if you need some?

Thanks and let me know if anyone wants anything!

tibbytib

Wow! That's what I call a GARAGE Sale!!

I actually need silicone couplings! Can I stop by sometime this week?

Also might be interested in the carbon pillar pod if it's for an RD.

Mahonroy

Yeah definitely! I typically work pretty late on Mondays, Tuesdays, and Thursdays... but any time Wednesday, Friday, or the weekend works if you want to swing by. I'm in West Brighton.

Megladon

Any of those turbo manifold still available? If so shipping to 90302 California

tiburon974

Very interrested by maintec turbo manifold. pm you.
Thanks

Juanra

Out of curiosity, is the maintec a T3 flange?