![]() |
Due to my current financial situation the turbo had to go 02.gif Ill miss it but it had to be done.
The following are for sale: (pics at bottom) Airresearch (Garett) t3 . 48ar internally gated water cooled turbo. Fully rebuilt when I got it, under 10k miles since. Still no shaft play and no oil blowby. *Oil lines and Downpipe with o2 bung included* $350 + shipping OBX turbo manifold with t3 flange. $100 + shipping Johnny Racecar FMIC, I dont remember the dimensions but it fits the hole in a stock bumper perfectly. I bought it used with two small dents in it, holds air fine. $120 + shipping Charge piping, complete with 1g dsm BOV $75 +shipping -note the piping is unpainted mild steel and not mendrel bent. Still a good deal IMO, see pics below Shark Racing lowering springs, 1.75" drop $200 + shipping Custom mounted Autometer Boost gauge with surround for RD2 (see pic below) $60 + shipping and finally, 17" White Motegi Rt5's with Essenza 205/40/17 Tires (80% tread) $600+shipping -Price may seem high but they are cheaper than you will find any other white rt5. I hate to see these go 02.gif All prices are OBO, but because Im in need of money consider the prices pretty firm. That being said some are more open to negotiation than others, so might as well try me lol I will also have a few more things for sale but they are still on the car, they will probably be out this weekend. If you are interested in any of the following please PM me and we can work it out from there. - 440cc RC injectors; sale currently pending to builtallmota -190lph dsm fuel pump; until I can find my stock pump or someone can send me a new one I cant take it out -the famous Airborne 16 bit Seimens Turbo ECU; while this unit had its problems, it successfully converted my rd2 from maf to map and remained my sole fuel management throughout my cars turbo "career" lol. It runs rich but a simple safc could fix this. Needless to say I will be selling this for a fraction of the cost I got it for. I may list this on NT as well since it is a direct ECU swap for GKs -Decompression gasket, lowers to 8.8:1 When I get these out of the car I will either expand this thread or create a new one with prices. PICS: turbo, mani, and dp http://img.photobucket.com/albums/v235/ajs...ib/Tibro001.jpg http://img.photobucket.com/albums/v235/ajs...le/100_3450.jpg http://img.photobucket.com/albums/v235/ajs...le/100B3441.jpg FMIC and piping http://img.photobucket.com/albums/v235/ajs...ib/Tibro004.jpg http://img.photobucket.com/albums/v235/ajs...pg?t=1174430697 Wheels http://img.photobucket.com/albums/v235/ajs.../Picture032.jpg Boost gauge http://img.photobucket.com/albums/v235/ajs...le/100_3194.jpg ECU http://img.photobucket.com/albums/v235/ajs.../Picture008.jpg |
How bout the seats? laugh.gif This stuff should go quick, you have a quality setup.
|
I will take the boost gauge with surrond...
need you paypal addy |
PM sent mwood.
Also to everyone interested I forgot to mention the 3% paypal fee's in the first post; pretty insignificant but still should be mentioned. |
Hey, I want the piping and turbo manifold. Any idea what the shipping to Cambridge, ma would be? 02141? I can paypal you on friday (when I get paid!)
|
Interested in the Decompression plate. PM sent
|
Yes injectors are still sold to me....let me know when you have them out!!
thanks |
I release my dibs on boost gauge and surround...I thought when i was at work it was an custom steering column one...
|
I'm very interested in the FMIC, Turbo, manifold if the other guy doesn't get it, and BOV... Let me check around, I know a little but not enough about turbo's, Can I get some feedback from the gearheads on this site, is this a good deal, good turbo?
Is this ECU built for higher horse or more for kits like this?... Also if you list it what will be the price? |
the ecu was built specifically for his application so you should be fine. and its a good deal. i know hes sad to let it go
|
Im working out deals with people on most of the turbo stuff, any interest in the springs or wheels??
|
the ECU is out, and Im looking for $500 shipped. This includes the 2.5 bar map sensor, cps, ecu, sensor diagrams and the harness to make it "plug and play" into an RD. Everything you need to run a map based turbo ecu in a maf RD tiburon. Also I paid much more than that for it... 02.gif
The injectors are also out, builtallmota you have a pm! the turbo, ECU, FMIC, boost gauge, lowering springs and wheels are still for sale, give me offers! |
Dude first of all i hate to see you sell your stuff i love your setup its clean and deff a sleeper, for the boost gauge what all comes with it,does the gauge come out cause i already got a boost gauge ill just put this one in my paseo, my piece has the fog switch so it would a pain to drill mine out, would you take 50 shipped with paypal fees included.... let me know
|
Interest in the springs. Have pics? how about a shipping quote to k8a 4h1? Thats Ontario, Canada
|
Jbizut someone currently has dibs on the boost gauge and sale is pending, Ill let you know if it doesnt work out.
holeshot you have a pm! |
payment sent on the ecu........i might be interested in the turbo as well...i wll let you know.
|
ok, i thought mwood released his dibs, no big deal just let me know fing02.gif
|
mwood did release his dibs, someone local wants it.
let me know bout the turbo SuPaDuPa fing02.gif |
Sell me your seats! omfg.gif
|
tongue.gif maybe someday Pat!
Builtallmota hasnt been online since the 21st and Ive been holding the injectors for him... Ill give him a few more days but if anyone is interested in some 440cc injectors feel free to pm me incase he never comes back |
Bump for a great turbo and fmic!!
|
As of April 4th it has been 2 weeks since builtallmota has been on this site. I am releasing his dibs so unless he comes back and reclaims his dibs the injectors are up for grabs.
They are RC racing 440cc injectors, look brand new and are a direct swap into our fuel rail. Im looking for $250 + shipping obo. I have pics if anyone wants them Also still have the turbo, fmic, and wheels |
Everything is now claimed 'cept the wheels. I will take no lower than $500 + shipping. $500 for 4 mint wheels with good tires on them is a heck of a deal. Ill be putting them on ebay in a couple days if no one bites!
|
Springs gone tibminn?
|
yes they are, sorry!
|
wheels, would like quote for shipping to residential 80003, please
|
pm sent! bump
|
Who took the injectors?
|
Well pending one final payment all of this is sold.
I still have the boost gauge surround (not the guage) if anyone is interested Ill trade for a stock one or something, we can work it out |
TibMinn,
Whats is the status on the DSM fuel pump? is it sold already? if not... is it out of the car? how quick can you ship it out? Please let me know Thanks so much |
All times are GMT -6. The time now is 06:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands