Hey Tibsters,

The wife and I just wanted to offer up some pieces we are just kinda hording for who knows what reason. If anyone needs any of this stuff understanding it's stock stuff we sell it off cheap. BABY = need more room.

2000-2001 stock front / rear bumpers / side skirts
They are yellow so you know.

stock exhuast muffler (from first flange to tip) - not sure why but I thought i'd offer for some odd reason before I scrap it.

Rear bench seat (black/patterned)

Cuda kit Spoiler (Unpainted still bubble wrapped sice 2001)


Most places on the north east are deliverable if your willing to work it out otherwise like I said. You pay the shipping we will ask pocket change on the items. Will take pics upon request if really necessary and just hope if you happen to need any of these parts a sale like this would help you out instead of junkyard prices.

You can contact me or Lil Tiby.

How much are you selling the Cuda spoiler for? I might be interested.

Do u happen to have a back rear quarter panel and/or hood?

gotta passenger side door?????????

don't scrap the exhaust. it's worth some money and some members on here could use it sometime.

How much for the stock front and rear bumpers shipped to 42025.

Thanks for the replies. I want to do right buy time so I will look up the shipping for the area codes on the pieces asked and offer them in the order I see here in the thread and the PM times sent to me.

Thanks for advice HKC, I'll keep it around shoudl it help someone out eventually.

Shim - I do have a stock hood depending on how fast you need/want it as I still have to make permanent the Redz Hood we've had since 2002 or 2003.

Sucks having the money and all the parts I could want to purchase when I need a guy who does good labor. I'm way too busy.

whats your location? my rear seats have a few cig burns, and i really would like to replace them if possible.

Right now it's the bench as I have two, not sure if I'm getting rid of the rest for complete custom rear if you need more than the bench, just so you know.

I'm located northwest of D.C.

https://i14.photobucket.com/albums/a...e/IMG_0235.jpg

https://i14.photobucket.com/albums/a...e/IMG_0236.jpg

https://i14.photobucket.com/albums/a...e/IMG_0237.jpg

https://i14.photobucket.com/albums/a...e/IMG_0238.jpg

https://i14.photobucket.com/albums/a...e/IMG_0239.jpg

Here are pics on those bumpers. I made me a box out of two wardrobe boxes and I'll ge the shipping prices on those zip codes and pm you guys back with shipping costs. Then we can work out the rest.

Just wanted to note the scratches on the back sides of the rear bumper and the under lip of front bumper due to low clearances. All thin and minor just shows well on yellow.

I could really use the muffler what do you want for it???

In order of what I have in my pm's and this thread for the front and rear bumpers are as follows:


JH-Tibby
Loneshark
Pile of Rd1

Tibracer33 - spoiler ( too easy and I can ship it out for about $27 so I'd like $100, but these f*n bumpers have taken up all my time)

Exhaust stock muffler - $36 bucks to ship and I'd like $80.

I took the bumper up to the UPS store. Box over 165 in size has to go frieght. SO I made a box to the specs to pass, it has to be 32x62x18 at hte largest to make it.

There is no way to get a bumper in that whose minimal measurments are ( damn corners over the wheel well) 36x62 (squeezed in) x 18 (flexed)

FAIL!. Now that is both bumpers in the same box.

Dood said we could try since it's irregulare shaped and irregular costs a full 90 bucks regardless of box that I could Bubble wrap the whole thing and see if we could save on room and get it to pass without frieght or it has to be tried each bumper seperate.

Either way, together if they will cut me the inch slack or so on bubble wrap will cost me roughly under $120 bucks and seperate is that x 2.

Freight of a single man plastic kayak was $600 bucks.


Soo i fyour still interested I want to get rid of these. If I can pull of both bumpers at once bubble wrapped normal shipping at $120 bucks I'm asking for $200.

Most likely it may go seperate meaning my cost is $240-ish if so I'd like $310.

This doesn't include what it will cost me outa my profit to pay dood for materials and wrapping.

If you can offer up another alternative then by all means, cuz shipping this monster of a dimensions for bumpers is horrendous.

CUDA SPOILER - <span style="color:#FF0000">RECIEVED</span> fast shipping and good looking spoiler.
would definatly buy from seller agin.