Airram intake manifold, big bore throttle body, injen cold air
Thread Starter
Junior Member
Joined: Dec 2010
Posts: 8
Likes: 0
From: Canada
Vehicle: 2000 elantra
Airram intake manifold, big bore throttle body, injen cold air
#####SOLD#####
Selling a very rare ''AIRRAM'' performance intake manifold made for the Hyundai Beta engine. This is the Beta 1 version (so no provision for a MAP sensor).
First, I've never used this intake manifold myself nor do I know the history of this part (came with a box of parts I bought few years ago). I will provide more pictures (can only put 4 here) and details without problem but please understand that I won't be able to separate the two sections of the manifold.
This intake show some signs of wears and need some works before installation. It is missing a bolt and the gasket between upper/lower part is broken. Throttle side opening is about 2 5/8''. Some cosmetic imperfections too...
Also selling a big bore throttle body made by ''System Upgrade'' (Stamped ''SYSTEM SN 020314''). This BBTB have no coolant provision and come with an unknown condition TPS sensor. I do not know the exact throttle plate's size and I never used it myself. This BBTB show some signs of wears and little rust and was painted black at one point of is live, but throttle plate move without restriction... Will bolt to the AIRRAM manifold but diameter is smaller at about 2 1/4'' compared to the 2 5/8" AIRRAM's opening.
Also selling ''INJEN Technology'' cold air. Seem complete and in good condition (Again, I've never uses it nor know the history of this part...) Come with an unknow condition MAF sensor (part number 28164-23200) and unknow condition IAT sensor. To my knowledge, it's probably a cold air designed for RD Tiburon. Cone filter is included but dirty...
All parts are sold as is. It is your responsibility to check for fitment.
Make an offer (no low baller please, not in a hurry to sell, Would prefer to sell everything together)
Willing to ship at buyer's expense
Located in Granby, Quebec, Canada
Je parle aussi français.
Selling a very rare ''AIRRAM'' performance intake manifold made for the Hyundai Beta engine. This is the Beta 1 version (so no provision for a MAP sensor).
First, I've never used this intake manifold myself nor do I know the history of this part (came with a box of parts I bought few years ago). I will provide more pictures (can only put 4 here) and details without problem but please understand that I won't be able to separate the two sections of the manifold.
This intake show some signs of wears and need some works before installation. It is missing a bolt and the gasket between upper/lower part is broken. Throttle side opening is about 2 5/8''. Some cosmetic imperfections too...
Also selling a big bore throttle body made by ''System Upgrade'' (Stamped ''SYSTEM SN 020314''). This BBTB have no coolant provision and come with an unknown condition TPS sensor. I do not know the exact throttle plate's size and I never used it myself. This BBTB show some signs of wears and little rust and was painted black at one point of is live, but throttle plate move without restriction... Will bolt to the AIRRAM manifold but diameter is smaller at about 2 1/4'' compared to the 2 5/8" AIRRAM's opening.
Also selling ''INJEN Technology'' cold air. Seem complete and in good condition (Again, I've never uses it nor know the history of this part...) Come with an unknow condition MAF sensor (part number 28164-23200) and unknow condition IAT sensor. To my knowledge, it's probably a cold air designed for RD Tiburon. Cone filter is included but dirty...
All parts are sold as is. It is your responsibility to check for fitment.
Make an offer (no low baller please, not in a hurry to sell, Would prefer to sell everything together)
Willing to ship at buyer's expense
Located in Granby, Quebec, Canada
Je parle aussi français.
Last edited by 66plymouth; Dec 24, 2021 at 08:34 AM. Reason: SOLD
Senior Member
Joined: Sep 2009
Posts: 711
Likes: 1
From: Puerto Rico//Atlanta, GA
Vehicle: 1997 Beta Swapped Accent
Selling a very rare ''AIRRAM'' performance intake manifold made for the Hyundai Beta engine. This is the Beta 1 version (so no provision for a MAP sensor).
First, I've never used this intake manifold myself nor do I know the history of this part (came with a box of parts I bought few years ago). I will provide more pictures (can only put 4 here) and details without problem but please understand that I won't be able to separate the two sections of the manifold.
This intake show some signs of wears and need some works before installation. It is missing a bolt and the gasket between upper/lower part is broken. Throttle side opening is about 2 5/8''. Some cosmetic imperfections too...
Also selling a big bore throttle body made by ''System Upgrade'' (Stamped ''SYSTEM SN 020314''). This BBTB have no coolant provision and come with an unknown condition TPS sensor. I do not know the exact throttle plate's size and I never used it myself. This BBTB show some signs of wears and little rust and was painted black at one point of is live, but throttle plate move without restriction... Will bolt to the AIRRAM manifold but diameter is smaller at about 2 1/4'' compared to the 2 5/8" AIRRAM's opening.
Also selling ''INJEN Technology'' cold air. Seem complete and in good condition (Again, I've never uses it nor know the history of this part...) Come with an unknow condition MAF sensor (part number 28164-23200) and unknow condition IAT sensor. To my knowledge, it's probably a cold air designed for RD Tiburon. Cone filter is included but dirty...
All parts are sold as is. It is your responsibility to check for fitment.
Make an offer (no low baller please, not in a hurry to sell, Would prefer to sell everything together)
Willing to ship at buyer's expense
Located in Granby, Quebec, Canada
Je parle aussi français.
First, I've never used this intake manifold myself nor do I know the history of this part (came with a box of parts I bought few years ago). I will provide more pictures (can only put 4 here) and details without problem but please understand that I won't be able to separate the two sections of the manifold.
This intake show some signs of wears and need some works before installation. It is missing a bolt and the gasket between upper/lower part is broken. Throttle side opening is about 2 5/8''. Some cosmetic imperfections too...
Also selling a big bore throttle body made by ''System Upgrade'' (Stamped ''SYSTEM SN 020314''). This BBTB have no coolant provision and come with an unknown condition TPS sensor. I do not know the exact throttle plate's size and I never used it myself. This BBTB show some signs of wears and little rust and was painted black at one point of is live, but throttle plate move without restriction... Will bolt to the AIRRAM manifold but diameter is smaller at about 2 1/4'' compared to the 2 5/8" AIRRAM's opening.
Also selling ''INJEN Technology'' cold air. Seem complete and in good condition (Again, I've never uses it nor know the history of this part...) Come with an unknow condition MAF sensor (part number 28164-23200) and unknow condition IAT sensor. To my knowledge, it's probably a cold air designed for RD Tiburon. Cone filter is included but dirty...
All parts are sold as is. It is your responsibility to check for fitment.
Make an offer (no low baller please, not in a hurry to sell, Would prefer to sell everything together)
Willing to ship at buyer's expense
Located in Granby, Quebec, Canada
Je parle aussi français.
Give my a good price and I'll take everything.
Zip code 30340.
Thread
Thread Starter
Forum
Replies
Last Post
