Welcome To The Forums: FullblownTib
I would like to welcome a new member to our community!
Member Name: FullblownTib
Registered on: Aug 29 2008, 11:33 AM
Profile: http://www.rdtiburon.com/index.php?showuser=9219
FullblownTib,
Welcome To RDTiburon.com. Please feel free to look around and post get to know others! Remember, you will not be able to post anywhere in the forums until you reply to this topic.
Please be sure to read the site rules completely. Here are a couple more items specifically for new users.
1. You will not be able to post anywhere in the forum until you complete your introduction, you can do that by replying to this post.
2. We do ask that you fill out your profile completely, to include your location, and year model of your Tiburon if you have one.
Here is a SAMPLE STANDARD FORMAT INTRODUCTION POST.
Hi, my name is ____.
I'm from ______.
I drive a ______ _____.
I found these forums through _____ _____ __ __ _ _____ _ ______ _________________________ _ ___.
I've done the following mods to my car.
__
____
_
_____
It's good to meet you all and I hope to learn from you!
Member Name: FullblownTib
Registered on: Aug 29 2008, 11:33 AM
Profile: http://www.rdtiburon.com/index.php?showuser=9219
FullblownTib,
Welcome To RDTiburon.com. Please feel free to look around and post get to know others! Remember, you will not be able to post anywhere in the forums until you reply to this topic.
Please be sure to read the site rules completely. Here are a couple more items specifically for new users.
1. You will not be able to post anywhere in the forum until you complete your introduction, you can do that by replying to this post.
2. We do ask that you fill out your profile completely, to include your location, and year model of your Tiburon if you have one.
Here is a SAMPLE STANDARD FORMAT INTRODUCTION POST.
Hi, my name is ____.
I'm from ______.
I drive a ______ _____.
I found these forums through _____ _____ __ __ _ _____ _ ______ _________________________ _ ___.
I've done the following mods to my car.
__
____
_
_____
It's good to meet you all and I hope to learn from you!
<div class='quotetop'>QUOTE (krazymikeygt @ Aug 28 2008, 07:58 PM) <{POST_SNAPBACK}></div><div class='quotemain'>get ready for the nt group to come here and start shit....
i might be on nt, yes. but im all about hyundaiperformance. thats my site</div>
<div class='quotetop'>QUOTE (RD Greeter @ Aug 29 2008, 11:33 AM) <{POST_SNAPBACK}></div><div class='quotemain'>I would like to welcome a new member to our community!
Member Name: FullblownTib
Registered on: Aug 29 2008, 11:33 AM
Profile: http://www.rdtiburon.com/index.php?showuser=9219
FullblownTib,
Welcome To RDTiburon.com. Please feel free to look around and post get to know others! Remember, you will not be able to post anywhere in the forums until you reply to this topic.
Please be sure to read the site rules completely. Here are a couple more items specifically for new users.
1. You will not be able to post anywhere in the forum until you complete your introduction, you can do that by replying to this post.
2. We do ask that you fill out your profile completely, to include your location, and year model of your Tiburon if you have one.
Here is a SAMPLE STANDARD FORMAT INTRODUCTION POST.
Hi, my name is _Steve___.
I'm from Az______.
I drive a _03 Tib GT_____ _____.
I found these forums through __Someone startin a firestorm on NT<oh bruther>___ _____ __ __ _ _____ _ ______ _________________________ _ ___.
I've done the following mods to my car.
_fully built bottom end with Ross 8.8:1 pistons and rods ARP rod bolts,C&C'd ported and polished and flowbenched heads with 1mm over stainless steel valves along with custom valve springs, Crane Stg 2 Cams and fidanza adjustable cam gears and sprockets, Mp90 blower flowing through a C&C'd port and polished lower intake,7&1/2 inch lower pulley with a 2.9 upper pulley pushing 24 psi, fueled by 460cc injectors and an NGM alky kit and 2 190lph fuel pumps(one in the tank and one inline)a 6 spd trans with a NGM twin disc and custom aluminum flywheel and a Phantom grip posi unit all being tuned with a MapEcu2 at the present time
____
_
_____
It's good to meet you all and I hope to learn from you!</div>
i might be on nt, yes. but im all about hyundaiperformance. thats my site</div>
<div class='quotetop'>QUOTE (RD Greeter @ Aug 29 2008, 11:33 AM) <{POST_SNAPBACK}></div><div class='quotemain'>I would like to welcome a new member to our community!
Member Name: FullblownTib
Registered on: Aug 29 2008, 11:33 AM
Profile: http://www.rdtiburon.com/index.php?showuser=9219
FullblownTib,
Welcome To RDTiburon.com. Please feel free to look around and post get to know others! Remember, you will not be able to post anywhere in the forums until you reply to this topic.
Please be sure to read the site rules completely. Here are a couple more items specifically for new users.
1. You will not be able to post anywhere in the forum until you complete your introduction, you can do that by replying to this post.
2. We do ask that you fill out your profile completely, to include your location, and year model of your Tiburon if you have one.
Here is a SAMPLE STANDARD FORMAT INTRODUCTION POST.
Hi, my name is _Steve___.
I'm from Az______.
I drive a _03 Tib GT_____ _____.
I found these forums through __Someone startin a firestorm on NT<oh bruther>___ _____ __ __ _ _____ _ ______ _________________________ _ ___.
I've done the following mods to my car.
_fully built bottom end with Ross 8.8:1 pistons and rods ARP rod bolts,C&C'd ported and polished and flowbenched heads with 1mm over stainless steel valves along with custom valve springs, Crane Stg 2 Cams and fidanza adjustable cam gears and sprockets, Mp90 blower flowing through a C&C'd port and polished lower intake,7&1/2 inch lower pulley with a 2.9 upper pulley pushing 24 psi, fueled by 460cc injectors and an NGM alky kit and 2 190lph fuel pumps(one in the tank and one inline)a 6 spd trans with a NGM twin disc and custom aluminum flywheel and a Phantom grip posi unit all being tuned with a MapEcu2 at the present time
____
_
_____
It's good to meet you all and I hope to learn from you!</div>



