Spacer thread
Thread Starter
Senior Member
Joined: Dec 2011
Posts: 134
Likes: 0
From: Boston, MA
Vehicle: '12 Boston Red Veloster
Anyone on here using spacers on their V? I was thinking about getting a set of 10mm. I have the stock rims now so those spacers should make it look a little nicer.
Senior Member

Joined: Dec 2008
Posts: 3,837
Likes: 0
From: Floating around the AUDM
Vehicle: X3 Sprint, S-Coupe Turbo
The veloster has a track width of about 1700mm
So 10mm spacers will increase the track width by about 1.17%
However, they will increase your scrub radius from negative to positive, resulting in more torque steer, dodgy split-mu braking, and some odd loads on the front suspension in general.
I'd save my money if I were you
So 10mm spacers will increase the track width by about 1.17%
However, they will increase your scrub radius from negative to positive, resulting in more torque steer, dodgy split-mu braking, and some odd loads on the front suspension in general.
I'd save my money if I were you
Look into garageline.com
They mad a custom set for my 2013 and I noticed they now sell them on their site
Moderator

Joined: Dec 2007
Posts: 2,448
Likes: 0
From: Thomaston, CT
Vehicle: 2012 Veloster DCT w/ Tech
^Garage line has been selling V spacers for more than a year now. They only had 20F/25R at first, but now have options as there was to much poke with those. The 15F/20R brings the stock wheels out flush with the fender.


