Hey guys..ive been trying to find out what is the stock RD1 Beta1 power (hp or kw) at wheels? I know its 104kw and 140hp with 133ft torque, that can be easily found on any website but what about stock power at wheels? does anyone know?

 

I believe its 115-120. There are a couple stock dynos floating around this website that i have seen

 

About 85-90Kw at the Wheels. Seen the dyno of a stock 2 litre in an Accent.

http://www.performancestylingcentre.com.au...202%20litre. htm

 

Auto or manual? There is about a 10% (I believe, but may be more) difference in favor of the manual.

 

~100-105whp normally for decent condition manuals. Autos I'd guess to be in the high 90s.

 

hmm...a little difference in numbers..but it its around the 90kw at wheels..not very good, but oh well.. tongue.gif

 

Completely stock... around 75-80kW, I reckon.

George's Accent made close to 90kW but with a header-back exhaust... & by the looks of it, some sort of cold air feed to the stock air-box that would most definitely also be fitted with a K&N panel filter.

 

It also depends on the condition of the engine.

 

That's true, even old oil can cause a parasitic drag and knock you down a HP or two...

 

<div class='quotetop'>QUOTE (OzFxCoupe @ Dec 19 2006, 11:29 AM) <{POST_SNAPBACK}></div><div class='quotemain'>Completely stock... around 75-80kW, I reckon.

George's Accent made close to 90kW but with a header-back exhaust... & by the looks of it, some sort of cold air feed to the stock air-box that would most definitely also be fitted with a K&N panel filter.</div>

Pretty much the basic mods that all of us have done. I do agree with your totally stock estimate 75-80Kw