All prices reflect those on FlyRyde.com RDmembers who know about FlyRyde should be aware of any discounts I've offered in the past. Otherwise this is the price list for the new guys smile.gif Prices do not include shipping.

Hoods:

1) Cadamurro type 600 CF/ 400 FG

http://flyryde.com/bodykits/cadamuro3.jpg
http://flyryde.com/bodykits/cadamuro4.jpg
http://flyryde.com/bodykits/cadamuro5.jpg

Available in Carbon Fiber, and Fiberglass


Bodykit:

2) Type S Front 600 CF/ 400 FG

http://www.flyryde.com/bodykits/rd2types.jpg

Available in Carbon Fiber, and Fiberglass


3) Wiper Coul in Carbon Fiber 150 CF/ 80 FG


Vertical Doors Conversions:

4) Vertical Doors Inc. vehicle specific RD1/2 kit. 1395


Interior:

5) OEM pillar and Triple Pod Pillar 150 CF/ 80 FG

http://flyryde.com/bodykits/pillar4.jpg
http://flyryde.com/bodykits/pillar5.jpg
http://flyryde.com/bodykits/pillar6.jpg
http://flyryde.com/bodykits/pillar7.jpg
http://flyryde.com/bodykits/pillar8.jpg
http://flyryde.com/bodykits/pillar9.jpg

Available in Carbon Fiber, and Fiberglass


This will be made sticky, and have pics/chops for future use.

No RD1 Cadamurro hood?

you guys got the EVO hood so blah.. lol...

neway, that sounds like a good lineup chris.. any pics on hand that you have of the type S sides?

is the type S front in production yet for the RD2? if so, i might be looking into it. if not in production could it be made a lil lower than what it would be on the RD1?


if the studie skirts are the ones that are in kspec forum, i think the rear would be nice to be like a molded pod custom version of the GTR rear lips.. maybe lower the stock bumper .5"-1" then mold on the GTR pods and sell as a full bumper replacement. you could also add a lil bit to the rear of the bumper to to make the look even nicer and bolder.

only reason i like the GTR pods, is because i have them, hehe. and there subtle as well as the studie 'type S' sides.

REDZMAN sent 3 scoops, Chris is making 1 hood for each gen (right? there BETTER be a Cadamuro for RD1 anyway wink1.gif)
Good lineup for the RD2s.
Can't wait to see the first gens once they're done.

is there possibilities for a different bumper? or maybe even just a lip kit? personally i dont like the type s look but i want to do something with the front of my car

Ok....i think its time we get a carbon fiber version of the MPS or Cuda II or whatever you want to call it....I need a new front bumper before next show season. Comeon...hook a brother up...HAHA hail.gif hail.gif hail.gif hail.gif

Awesome guys, I would like to see some pics of the Sides, Wiper Coul, Hood, And the CF Pillar Pods. Also Id like to see prices. If these are posted somewere else let me know. I had a Veilside kit but the sides got RIPPED off the other night. Ohwell shit happens.

Im with RedTurbulence. Maybe not the MPS becuase it is jsut way to low. The Cuda 2 or even the Cuda 1 I would be in on though.

Wiper <span style="color:green"><span style="font-size:12pt;line-height:100%">COWL</span></span>

BTW, both Gens use the same cowl.

I just got Chris's address, so the scoops will go out shortly.

wiper cowl, wiper cowl, WIPER COWL.

Need I say more. lol

Chris, how long will it take you to get production versions of the Cadamurro hood once you receive the hood scoops?

MPS(cudaII) isnt that low.. with eibach suspension, and that bumper on, i dont hit nething unless im driving like a jackass, and i live in detroit.. really crappy roads.. the MPS bumper, which is the Cuda II, same thing.. CUda II= MPS copy.. i wish it had the stock grill molded into it and a lil more lower styling..

i like the studie, and i will buy it if its produced..

See I was thinking that if I lower the Tib I will hit on everything. Alright MPS sounds good to me then

btw i got owned.gif by redz in the other thread on the wiper cowl. I didnt know that it was illegal. my bad

whats illegal?

Guys I spent all morning yesterday doing work in Photoshop for you, and getting all the pics prepped. Then when I went to FTP them to FlyRyde my bootleg internet went out at the house. Seems like when I try to take up too much space on my neighbors wireless internet with HUGE FTP files, it just dies. So I usually have to wait for a day or so, but this time the wife took the laptop with her to Vegas for work. So I only have a CD with the files on it that I can use to load before she gets back.

Here's the two shots that came through before it shut down,

http://www.flyryde.com/bodykits/pillar4.jpg
http://www.flyryde.com/bodykits/pillar5.jpg

Not great, but oh well. Anyway, my point of this thread was to have a bunch of products, priced, with pics, always easily findable in my forums. I'll have the RD1 stuff up soon.

I also forgot the CF hatch for the RD2 which is ready to start as well.

We'll work on a new bumper for you guys, possilby the CudaII, but we might want to add a little something to it. Maybe a vent like stock as mentioned above, we'll see.

My major goal here is to get funds generated to keep moving all of these parts. Once we have the first set of any of these parts, they'll be available for everyone whenever they want.

I'll get more stuff up later today if I can get to a comp. I'm at my parents house right now dropping off the Navigator, since I used it to pick up the 03-05 Tiburon Hatch for the GK guys. We're doing a CF hatch for them too. Though, there's looks like it'll be cheaper due to the size of the glass. Thanks guys. Keep those ideas coming.

what about rd2 eyelines/ cowlings for the headlights? i think the rd2 needs some headlight cover or eyeline overhaul for a new look..

agreed

I forgot to make my "Example" RD2 cowlings. maybe I'll try it today.

What if you got something to cover both lights on the out side.

\/ Kinda like that but lower so it covers the top of the lights.
__
0o

You could close it in the hood to secure it or something. I dunno. I'm thinking like a Canard (those things on the front bumpers to create downforce) but over the headlights.

what about making us the evo hood? or that one with those gills/vents goin up both sides?

Both planned man, and let me know when you get those AEs.

hows those fenders coming chris???


REDZ make an idea for the eyelines so we can check em out.. i cant even think of an idea for em.. lol.... maybe they could be incorporated into one of the new flyryde bumpers... cool.gif

ya redz get moving. chris, are we going to have a hood by spring? Ill be hitting a lot of shows next year so Ill need a hood for sure. Where do the RD2s sit in you list of things to do? I would love to see a hood and maybe the cuda2/mps kit by show season. maybe we could start getting some money together if you think we can make it happen.

Hit me up via AIM later today and remind me. Im' perty busy with all this Post Nopi activity and talking to my new contacts.

I can get it done later today, just remind me.

Reminder 1

the type s front bumper... straight replacement or lip? i may be interested

its a replacement

I found a couple of pics of the actual Cadamuro hood on an RD2, not a chop.
You can check it out from different angles. If you are not in love with it yet, it is a good time.

Tried to chop how it would look in CF:
http://pic.hevre.co.il/Files/0799990...84865D159F.JPG

Actual pics:
Press HERE , and scroll down.

^ Some of the best RD2 Cadamuro hood pics I've ever seen are on MrHydeNT's own personal page... He's a member on these forums. Look him up on the "Members" link at the top of the page fing02.gif

Any chance in getting this Front bumper or Just the Lip?

I would be very interested and will send the money to have it made.

http://pic.hevre.co.il/Files/0799990...84865D159F.JPG

yea im def in on eyelines for the RD2 when your ready y do them ... maybe even eyelines for the tail lights to ?