Hyundai Aftermarket - Crank Thrust Bearing

Page 2 of 2

Show 40 post(s) from this thread on one page

Hyundai Aftermarket (https://www.hyundaiaftermarket.org/forum/)

- Engine, Intake, Exhaust (https://www.hyundaiaftermarket.org/forum/engine-intake-exhaust-11/)

- - Crank Thrust Bearing (https://www.hyundaiaftermarket.org/forum/engine-intake-exhaust-11/crank-thrust-bearing-33901/)

Viper966

03-23-2006 10:30 AM

^^^^
i thunk alot of people put those things in backwards

albert

03-23-2006 10:40 AM

I should note, that both motors that Jaws021 and I have seen with spacer problems were 100% STOCK engine and transmission.

I'm assuming they were installed improperly, or that the wrong size shim/spacer is installed @ the Factory.

a_gut

03-23-2006 11:22 AM

You can read (and see!) my experience with this issue here:

http://www.rdtiburon.com/index.php?showtop...3&hl=crank+walk

All times are GMT -6. The time now is 03:28 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page