Beta1 Vs Beta2
#11
Senior Member
Join Date: Mar 2006
Location: Columbus, Ohio
Posts: 3,285
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000 tiburon
they bolt to the same place but they wont hook up. the beta2 sensors are completely diffrent and will not be compatable AT ALL !!!!!!!!!!
oil temp sensor looks the same but i still changed it.
i'm going to do a post on EVERY diffrence with pics here this weekend. so hold on and i'll come thru for you on any other diffrences
oil temp sensor looks the same but i still changed it.
i'm going to do a post on EVERY diffrence with pics here this weekend. so hold on and i'll come thru for you on any other diffrences
#12
Senior Member
Join Date: Jul 2004
Location: Adelaide, OZ
Posts: 1,487
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Hyosung GT650
Is there any difference in the gear box as I want to do a beta1-2 swap including box but just want to know if the drive shafts ect are the same.
#14
tons of people have swapped to a beta II transmission.. its a DIRECT swap, just need to grind down the rear roll stop bracket.
gearing is a TAD longer in the beta II, but thats it.
i had a beta II trans in my tib.
gearing is a TAD longer in the beta II, but thats it.
i had a beta II trans in my tib.
#18
Junior Member
Join Date: Oct 2008
Location: CT and RI, United States
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Few important things to add;
G4GF (beta1 2.0L)
MAF
comp ratio 10.3:1
hydraulic lifters
G4GC (beta2)
MAP
comp ratio 10:1
mechanical sim based valves
G4GC (beta2)
MAF
CVVT on the intake side
comp ratio 10:1
Careful, because there is actually 3 different beta 2 heads. The main thing to look for is MAP or MAF.
G4GF (beta1 2.0L)
MAF
comp ratio 10.3:1
hydraulic lifters
G4GC (beta2)
MAP
comp ratio 10:1
mechanical sim based valves
G4GC (beta2)
MAF
CVVT on the intake side
comp ratio 10:1
Careful, because there is actually 3 different beta 2 heads. The main thing to look for is MAP or MAF.