lc 1.5 g4ec to a 2.0 beta swap
#1
Junior Member
Thread Starter
Join Date: Jan 2015
Location: shepparton vic aus
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: hyundai accent 2001
lc 1.5 g4ec to a 2.0 beta swap
hello i am new to this forum and i had a browse thrue topics but i carnt get a strait anser.
1. does anybody have the pin layout of both wire harness and what to splice to make the 1.5 harness work with beta engine
2.what things need to be changed or can i use parts off 1.5
3.can my 1.5 manual fit up to the bata engine and if not how do i go about fitting a manual to it
4. will my fuel pump be fine to use with the engine
im trying to gather as much information about the conversion as my 1.5 is not far from shitting itself.
any picture and info would be awesome thanks guys
1. does anybody have the pin layout of both wire harness and what to splice to make the 1.5 harness work with beta engine
2.what things need to be changed or can i use parts off 1.5
3.can my 1.5 manual fit up to the bata engine and if not how do i go about fitting a manual to it
4. will my fuel pump be fine to use with the engine
im trying to gather as much information about the conversion as my 1.5 is not far from shitting itself.
any picture and info would be awesome thanks guys
#2
Senior Member
Join Date: Mar 2010
Location: Perth, Western Australia
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1999 Elantra GLS Sportswagon
The 2.0l conversion has been done in Australia as well but getting it legal is another issue
http://www.hyperaustralia.com/forums...474&hilit=beta
speak to Tom [wheel_of_steel]https://www.hyundaiaftermarket.org/forum/user/3523-wheel-of-steel/
http://www.hyperaustralia.com/forums...474&hilit=beta
speak to Tom [wheel_of_steel]https://www.hyundaiaftermarket.org/forum/user/3523-wheel-of-steel/