moisture in my taillight
Posted 15 November 2009 - 01:17 AM
drill a tiny hole near the bottom rear of the light.. also, grab some clear silicone and put a small bead to redo the whole seal around them.
also you can rinse the inside of the tail with rubbing alcohol. it evaporates and doesnt leave a stain or residue ring behind it.
Posted 15 November 2009 - 11:01 AM
-i will try drilling a hole, worst that could happen would be moisture in my tailight lol.
-if that dont work ill try resealing the light and seal the hole i drilled
This post has been edited by racecar13: 15 November 2009 - 11:03 AM
Posted 21 November 2009 - 10:27 PM
-I took them off today (11/21/09) and turned them around until i found where the water was leaking from. (Go figure its in the top right corner where the water runoff is for the hatch).
-I wiped the inside as dry as i could through the reverse light hole and let it sit in the sun to remove the remaining fog.
-I then sealed the upper corner next to the hatch with clear rtv.
-suppose to have heavy rain tonight and tomorrow here in Georgia so we'll see how well it holds up.
-oh yea GO DAWGS!!!
Posted 03 December 2009 - 09:03 PM
UPDATE its been a couple weeks, we've had two or three heavy rain storms and no fog in the tail lights. clear RTV is holding up nice
they lost that week but beat GT the next.